XRP-XTREME RACING PROD. #10 120 Deg Dbl Swivel Hose End
Fitting - Hose End - 120 Degree - 10 AN Hose to 10 AN Female - Double Swivel - Aluminum - Blue / Red Anodized - Each
Dedenbear WATER HEADER SMALL BLOCK CHEVY
Dedenbears Innovative Water Header Replaces The Usual Mess Of Fittings, Lines, Elbows And Tees Typically Associated With A Remote Mount Electric Water Pump With A Single Aluminum Casting That Weighs...
AutoMeter FITTING WELD CONNECTOR FOR MECH. TEMP. GAUGE
Steel adapter with 5/8" -18UNF thread and flange for direct seal with AutoMeter mechanical oil and transmission temperature gauge probe sealing nuts. For installing AutoMeter Mechanical temperature gauge probes on...
AutoMeter FITTING ADAPTER 3/8 In. NPT MALE BRASS FOR MECH. TEMP. GAUGE
5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 3/8" NPT Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022630 Add-On: N/A...
AutoMeter FITTING ADAPTER 1/2-1/16 In. NPT MALE BRASS FOR MECH.TEMP. GAUGE
5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 1/2-1/16" NPT Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022647 Add-On: N/A...
AutoMeter FITTING ADAPTER METRIC M10X1 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M10x1.0 Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022654 Add-On: N/A Extended Information: Country of Origin: US Emissions : CARB Eligible Life Cycle...
AutoMeter FITTING ADAPTER METRIC M12X1 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M12x1.0 Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022661 Add-On: N/A Extended Information: Country of Origin: US Emissions : CARB Eligible Life Cycle...
AutoMeter FITTING ADAPTER METRIC M14X1.5 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M14x1.5 Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022678 Add-On: N/A Extended Information: Country of Origin: US Emissions : 1 Life Cycle Status:...
AutoMeter FITTING ADAPTER METRIC M16X1.5 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M16x1.5 Male Commonly used for oil pressure sensor / line installation on GM LS engines when connecting to the port on the top of the block...
AutoMeter FITTING ADAPTER METRIC 1/8 In. BSPT MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to 1/8" BSPT Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022692 Add-On: N/A Extended Information: Country of Origin: United States Emissions : 1 Life...
AutoMeter FITTING ADAPTER 1/2-1/16 In. NPT MALE EXTENSION BRASS FOR MECH. TEMP. GAUGE
1/2-1/16" NPT male extension for use with Mechanical Temperature gauges only. Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022708 Add-On: N/A Extended Information: Country of Origin: US Emissions...
AutoMeter FITTING ADAPTER 3/8 In. NPT MALE EXTENSION BRASS FOR MECH. TEMP. GAUGE
3/8" NPT male extension for use with Mechanical Temperature gauges only. Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022715 Add-On: N/A Extended Information: Country of Origin: US Emissions...
AutoMeter FITTING ADAPTER 1/2-1/16 In. NPT MALE ALUMINUM RED FOR MECH. TEMP. GAUGE
5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 1/2-1/16" NPT Male Attributes: Brand Name: AutoMeter GTIN: 00046074022739 Add-On: N/A Extended Information: Country of...
AutoMeter FITTING ADAPTER M16X1.5 MALE BRASS FOR MECH. TEMP. GAUGE
5/8" -18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to M16x1.5 Male Constructed from solid brass Attributes: Brand Name: AutoMeter GTIN: 00046074022753 Add-On: N/A Extended...
AutoMeter FITTING ADAPTER METRIC M12X1.5 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M12x1.5 Male for electric temperature or pressure Commonly used for electric temperature gauge installation in GM LS engine cylinder heads. If using with a Short Sweep...
AutoMeter FITTING ADAPTER METRIC M12X1.75 MALE TO 1/8 In. NPTF FEMALE BRASS
1/8" NPT Female to M12x1.75 Male electric temperature or pressure If using with a Short Sweep Electric Temperature gauge, sender #2259 is also required. Constructed from solid brass Attributes: Brand...
AutoMeter FITTING ADAPTER HEATER HOSE 5/8 In. 1/8 In. NPTF FEMALE BRASS
For use with Full Sweep and Short Sweep Electric gauges only. For mounting Water Temperature gauge senders or probes in 5/8" heater hose. This kit is ideal for vehicles with...
AutoMeter FITTING ADAPTER HEATER HOSE 3/4 In. 1/8 In. NPTF FEMALE BRASS
For use with Full Sweep and Short Sweep Electric temperature gauges only. For mounting Water Temperature gauge senders or probes in 3/4" heater hose. This kit is ideal for vehicles...
AutoMeter FITTING ADAPTER TRANSMISSION LINE 3/8 In. OD TUBING 1/2-1/16 In. NPTF
For Transmission Temperature Gauges Use this kit to install mechanical and electric transmission temperature gauges in the HOT transmission cooler hardline. Perfect for applications where a temperature port or pan...
AutoMeter FITTING ADAPTER TRANSMISSION LINE 5/16 In. OD TUBING 1/2-1/16 In. NPTF
For Transmission Temperature Gauges Use this kit to install mechanical and electric transmission temperature gauges in the HOT transmission cooler hardline. Perfect for applications where a temperature port or pan...
AutoMeter FITTING ADAPTER 3/8 In. NPT MALE BRASS FOR AUTO GAGE MECH. TEMP.
For adapting Autogage mechanical temp probes to 3/8" NPT ports. 5/8" -18 UNF female thread, 45 Degree tapered seat to 3/8" NPT male Manufactured from high quality brass For Autogage...
AutoMeter FITTING ADAPTER 1/2-1/16 In. NPT MALE BRASS FOR AUTO GAGE MECH. TEMP.
For adapting Autogage mechanical temp probes to 1/2-1/16" NPT ports. 5/8" -18 UNF female thread, 45 Degree tapered seat to 1/2-1/16" NPT male Manufactured from high quality brass For Autogage...
AutoMeter FITTING ADAPTER 90 1/8 In. NPTF FEMALE TO -3AN MALE BRASS
1/8" NPT Female to -3AN Male Use to connect #3 (-3AN) braided stainless steel line to AutoMeter Mechanical gauges and Electric Pressure gauge senders. -3AN male to 1/8" NPT female,...
AutoMeter FITTING ADAPTER 90 1/8 In. NPTF FEMALE TO -4AN MALE BRASS
1/8" NPT Female to -4AN Male Use to connect #4 (-4AN) braided stainless steel line to AutoMeter Mechanical gauges and Electric Pressure gauge senders. -4AN male to 1/8" NPT female,...
AutoMeter FITTING ADAPTER 45 -4AN FEMALE TO -4AN MALE STEEL
-4AN elbow fitting, 45 deg. with swivel nut. Also for use with the new -4AN Fuel Pressure, Brake Pressure and Nitrous Pressure gauges. -4AN male to -4AN female, 45 degree...
AutoMeter FITTING ADAPTER 90 -4AN FEMALE TO -4AN MALE STEEL
-4AN elbow fitting, 90 deg. with swivel nut. Also for use with the new -4AN Fuel Pressure, Brake Pressure, and Nitrous Pressure gauges. -4AN male to -4AN female, 90 degree...
AutoMeter FITTING ADAPTER -4AN MALE TO 1/16 In. NPT MALE FOR FORD FUEL RAIL
1/16" NPT Male to -4AN Male mechanical gauge adapter for fuel rail. 1/16" NPT male thread to -4AN male Manufactured from high quality zinc coated steel Ideal for mechanical pressure...
AutoMeter FITTING ADAPTER 90 1/8 In. NPTF FEMALE TO -4AN MALE ALUMINUM BLUE ANODIZED
1/8" NPT Female to -4AN Male Use to connect #4 (-4AN) braided stainless steel line to AutoMeter Mechanical gauges and Electric Pressure gauge senders. -4AN male to 1/8" NPT female,...
AutoMeter FITTING ADAPTER 1/8 In. NPTF FEMALE TO 1/16 In. NPT MALE FOR FORD FUEL RAIL
1/16" NPT Male to 1/8" NPT Female adapter for fuel rail. For use with Electric Fuel Press. Gauges. 1/16" NPT male thread to 1/8" NPT female Manufactured from high quality...
AutoMeter FITTING THERMOCOUPLE COMPRESS 3/16 In. 1/8 In. NPTF MALE INCL. WELD BOSS
3/16" Compression to 1/8" NPT connector fitting and mating 1/8" NPT weld fitting. 3/16" thermocouple compression fitting to 1/8" NPT male thread Weld in 1/8" NPT female threaded bung Manufactured...